Back to Blog
How-to Guides 2026-11-16 Ceres Chill — The Breastmilk Storage Game-Changer 0 views

How to Fit Super Easy Sipper Lids on Your Chiller/Warmer

How to Fit Super Easy Sipper Lids on Your Chiller/Warmer

Learn how to swap a nipple for a Super Easy Sipper Lid on your Chiller's inner chamber or any narrow-neck bottle, plus fit checks and care tips.

Why swap the nipple for a sipper lid?

When your baby is done with nipples, you don't have to retire the bottles. The Super Easy Sipper Lid is a patented silicone attachment that converts your Chiller's inner chamber or any narrow-neck bottle into a sippy cup. It also fits the Ceres Chill Cup when you use the connector.

This guide walks you through the fit, the setup, and the care steps so you can move from infant nipples to toddler sippy cups without guesswork.

What you get in the pack

  • Super Easy Sipper Lids: Comes as a set of two (2) sipper lids, in Gray or Plum. Two lids mean you can keep one clean and ready while the other is in use or in the dishwasher.
    Super Easy Sipper Lids
    Super Easy Sipper Lids
  • Super Easy Sipper Lids: Made from 100% soft, durable silicone that is gentle on teeth and gums. Silicone is comfortable for toddlers transitioning from bottles and stands up to daily use.
  • Super Easy Sipper Lids: Dishwasher safe (top rack recommended). Easy cleaning keeps the lids in rotation without hand-washing every time.

Fitting the sipper lid: a step-by-step check

The supplied product information confirms compatibility with the Chiller's inner chamber, any narrow-neck bottle, and the Ceres Chill Cup with the connector. It does not include a separate tightening sequence, so use the steps below as a practical fit check rather than a manufacturer instruction.

  1. Start with a clean, dry lid and bottle: Remove the nipple from your narrow-neck bottle or the Chiller's inner chamber. Make sure the rim is clean and dry so the silicone can seat evenly.
  2. Align the sipper lid on the rim: Press the lid down evenly around the rim. The soft silicone should sit flat without bunching.
  3. Check the seal before handing it over: Give the lid a gentle tug upward. If it stays put and the rim looks evenly covered, it's ready. If it lifts easily, reseat it.
  4. Test with a small amount of liquid first: Fill with a little water and tip the cup over a sink. A few drops at the spout are normal; steady leaking around the rim means the lid needs reseating.

Making the transition from bottle to sippy cup

The Super Easy Sipper Lid is designed to let your growing baby gradually develop from infant nipples to toddler sippy cups. You can offer the same familiar bottle with a new top, which keeps the routine consistent while your child practices a new drinking style.

Because the lid is soft silicone, it's gentle on teeth and gums—a small comfort during teething or those early sippy-cup days.

Fit and care details that affect daily use

  • Compatibility: Fits the Chiller's inner chamber, any narrow-neck bottle, and the Ceres Chill Cup with the connector. The supplied information does not list wide-neck bottles, so check your bottle's neck style before relying on it.
  • Cleaning: Toss the lids in the top rack of the dishwasher. For hand-washing, warm soapy water works, but the supplied care note only specifies dishwasher safe (top rack recommended).
  • Storage: Keep the spare lid in your diaper bag or pump bag so you always have one when the other is dirty or in the dishwasher.
  • Warranty: Comes with a Lifetime Warranty for the original purchaser, so you can use it daily without worrying about wear and tear.

What the supplied information doesn't confirm

The product record does not include a specific age or size range for the sipper lid, nor does it state that the lid is leak-proof under all conditions. It also doesn't list compatibility with wide-neck bottles or provide a recommended cleaning temperature beyond the dishwasher note.

If you need those specifics, check the full product guide or contact Ceres Chill directly. For most families, the lid's simple press-on design and silicone construction make it a straightforward switch from bottle to sippy cup.

Related Articles

Customer Service
Home
Products
Cart
Profile